Enhanced geometry functions
[Ten rozdział nie został jeszcze przetłumaczony.]
Click on the action symbol in the bottom left corner of the
Geometry inspector to access additional functions.
- Przekształcaj zawartość
-
This switch (which is set by default) causes that frame
contents are changed accordingly, when you change frame size or frame
position. If you e.g. have placed an image of 5x5 inches in a frame of
the same size and you then enlarge the frame to 10x10 inches, the
image content will be 10x10 inches also afterwards.
If the switch is off, you can change frame size and frame position
without transforming the content. In the above example the image would
keep its size of 5x5 inches. If you e.g. move the frame 1 inch to the
right, the content will stay on its previous position.
Końcówkę: Use the [Command] key for toggling the switch
state temporarily.
- Dopasuj ramkę do rozmiaru zawartości
-
Choose this menu item if you want to adjust the frame to the
current content size.
- Dopasuj ramkę do pierwotnego rozmiaru zawartości
-
Use this menu item to resize the frame to fit the original size
of the content.
- Dopasuj zawartość do rozmiaru ramki
-
When you choose this menu item, the content will be adjusted to
the frame size. Chances are that the content proportions will be
changed.
- Dopasuj proporcjonalnie zawartość do rozmiaru ramki
-
Using this menu item, the content will be adjusted, keeping its
original proportions, in the current frame. The content will be
centered in the frame, and will fully fill the frame. Chances are that
the content will be either higher or wider than the frame.
- Przywróć pierwotny rozmiar zawartości
-
This menu item restores the original content size in the
current frame. The content will be centered in the frame.
Copyright © invers Software & DSD.net (Główna)
Ostatnie zmiany 13. czerwiec 2015
